Back To Top

GE 3/4 HP Continuous Feed Garbage Disposer - Non-Corded

  4.4
84 Reviews

  • Stainless Jam Resistant Impellers
  • 3500 RPM Grinding Action
  • EZ Mount Installation
  • Direct Wire Power Connection
  • Quiet Package Sound Reduction

Product Inquiry Form

All fields marked * are required.

Inquire about: GE 3/4 HP Continuous Feed Garbage Disposer - Non-Corded
Required Information



Optional information




Pricing not available online for this model. Please call or contact us for current pricing.


Why we don't show pricing Financing available
Appearance Non-Removable Splash Guard
Sink Stopper
Stainless Steel Sink Flange
Dimensions 14 1/2" H x 8 1/2" W
Disposer Features 2 Level Precutter
3/4 Horsepower Motor
3500 RPM Grinding Speed
Cold-Rolled Carbon Steel Armature Shaft Material
Continuous Feed Disposer
Direct Wire Power Connection
Drain Connector
Drain Elbow
Dual Swivel Jam Resistant Stainless Impellers
EZ Mount Installation
Manual Reset Overload Protector
Stainless Steel Turntable Material
Wall Switch Control Method
Manufacturers Warranty 1 Year Limited Parts and Labor
Style: Disposers
Height: 14 1/2 Inches
Width: 8 1/2 Inches
Horsepower:3/4 HP
Dimensions Guide Click here to download
Installation Guide Click here to download
Owner's Manual Click here to download
Product Specifications Click here to download

No rebates currently available for this model.

Average Rating

out of 5 (84 Reviews)

0-5 of 84 Reviews |

A great Disposal that could use a few tweaks

by: Anonymous

Yes, I would recommend this to a friend.

Source: ge.com

Submitted: 12-20-2015

I just finished installing what I believe will be a really great Strong disposal. It could use a few improvements in the installation area that would be a tremendous benefit. First, the dishwasher inlet port knock out plug is grossly under scored. It takes too muck force to knock the plug out as the instructions indicate. I used several blunt drifts finally relying on a 3/8 sucked extension after splintering two wooden dowel rods. When the extension finally breached the plug, I was rewarded with a badly bruised thumb. This plug, unless redesigned, should be drilled out and not knocked out. Second, I found the electrical connection box on the bottom of the unit has very limited access for the power cable. Two ports 180 degrees apart would help greatly. Thirdly, putting three cover back in place after making the electrical connections is way too difficult when you consider the bottom of most cabinets only gives you about 4 inches of clearance between the bottom of the unit and the cabinet floor. Also the nut that secures the round cover plate on the connection box cannot be tightened with either a nut driver or a thin wall socket. There is not enough clearance in the recess to allow the nut to be wrenched properly. You really should suggest in the instructions that the electrical connections be made with the unit upside down leaving a 3 or 4 ft length of cable as a pig tale for final connection at a close power access point. A final suggestion: the neck of the flange that passes through the sink bottom could be 2 inches shorter. This would provide adequate room for the assembly of all the mounting parts plus it would give much needed access area under the bottom of the unit to make the electrical connections. The time I spent for this installation that was a replacement of a broken disposal exceeded 6 hours. This included modifying the plumbing connections and major modifications to the electrical supply. A new installation would take less time. Having finally completed the installation, I am fully satisfied with the product and believe it will fully meet our expect ions.

Just the right size

by: Anonymous

Yes, I would recommend this to a friend.

Source: ge.com

Submitted: 12-08-2015

I made a good choice, works very well. A bit loud, but I am hard of hearing, so its good.

Returning customer

by: Anonymous

Yes, I would recommend this to a friend.

Source: ge.com

Submitted: 11-18-2015

I purchased a GE disposer 20 years ago and finally needed to be replaced. I an extremely satisfied with the new disposer. The ease of installation was a plus.

Quiet and Powerful

by: Anonymous

Yes, I would recommend this to a friend.

Source: ge.com

Submitted: 11-17-2015

Very powerful and much quieter than my older disposer.

Grinds food efficiently

by: Anonymous

Yes, I would recommend this to a friend.

Source: ge.com

Submitted: 11-13-2015

Use it everyday and am very satisfied. I would recommend it to others.
0-5 of 84 Reviews |
About Albert Lee Appliance

Albert Lee Appliance has been a fixture in the Pacific Northwest since 1939 and our long-standing experience cannot be beat. We’ve been established for three generations, and we’re proud to be a thriving member of our local business communities. We sponsor a number of local charitable events and organizations including Children’s hospital, Seattle Children’s Home, Detlef Schrempf Foundation, and the Richard Sherman Blanket Coverage Foundation. We are also the title sponsor of Seafair – Seattle’s traditional summer festival.

Albert Lee Appliance is proud to carry the largest display of premium quality appliances in Washington State. With over 90 different brands of kitchen, laundry, and outdoor appliances for your home. Our great selection is just the beginning. Our friendly, knowledgeable staff makes sure you find exactly what you need. Whether you're buying a new high-performance cook top, building your dream kitchen, outfitting your laundry room or even designing an outdoor kitchen; Albert Lee is committed to making your appliance buying experience the best it can be.

© 2016 Albert Lee Appliance. All Rights Reserved.

Shop